Disappearing 9 Patch Quilt

Here it is! My collection of black and white fabrics is now a Disappearing 9 Patch quilt! To tell you the truth, I wasn't crazy about the black and white color scheme, it just isn't me. But I wanted to use colors outside my comfort zone, and I really like how it turned out! My favorite part of the quilting process is taking the finished quilt off my longarm machine because it has become a quilt. That is when I decided I really like this one. I was going to sell it, but it is definitely growing on me!
(Editor's Note: The Disappearing Nine Patch quilt design is not my own, and I do not intend to imply anything more than insight into the fabrics I chose, and how I made it for my own personal use. I did some research before I posted the quilt, and there are several different names, including "9 to 4", "Tossed Nine Patch", and others. Just like many other common quilt designs, there are tutorials and photos of the design on many quilting websites and blogs. This blog is not intended to be downloaded or copied in any way, it is for your personal enjoyment only.)

Now I am going to show you how I made this Disappearing 9 Patch quilt. It looks complicated but it is really easy!! I used darks (black), lights (white), and an accent fabric (red). This quilt is about 62"x84", it is 4 blocks wide and 6 blocks long, for a total of 24 blocks. For each block I used 4 dark squares, 4 light squares, and 1 accent square. I cut my fabric into squares 4-1/2" x 4-1/2". I used a total of 96 dark squares, 96 light squares, and 24 accent squares. Here is a pile of my 4-1/2" black and white squares.

The next step is to sew the 9 Patch block. I made 24 blocks that look like this, with the dark squares in the corners and the accent square in the middle. I didn't worry about what fabric goes where, other than light, dark, and accent, because as you will see it doesn't matter!

And my finished blocks look like this. I made make 24 of these.

This is a traditional 9 Patch block! The next step is to cut each 9 Patch into 4 equal pieces with one horizontal cut and one vertical cut, like this.Now here is where the 9 Patch disappears! I turned two of the blocks, so it looks like this.I sewed the 4 small squares together into a finished block. I ended up with 24 of these blocks. I then sewed them together in rows, 4 blocks wide and 6 blocks long. The blue line shows one block.

Below is what the quilt looks like when the blocks are all sewn together.

As the saying goes, "It's not a quilt until it's quilted!"

This is my Statler Stitcher at work. I chose a quilting design called "Too Much Bubbly". It is a design with lots of little circles, I thought the quilt was busy enough and needed something fairly simple with curves and repetition. I chose red thread to compliment the red accent squares.

I like to put a narrow accent border to frame the quilt, and then a wide border to finish it off. It is like putting a double mat on a picture.

Here is a picture of the back, you can see the quilting design. It is the same fabric that I used for the accent blocks and narrow border on the front, even though Photo Shop changed the color a little ;-) Rather than using black and white on the back, I think it is fun to use a fabric that creates a little bit of a surprise!

Now you know how I made this Disappearing 9 Patch quilt! Here is the finished quilt one more time...